Dongguan Mingrui Ceramic Technology Co.,Ltd
Model No.: MRT-250
Density: 6.0 G/cm3
Max Use Temperature: 1500℃
Feature: High Precision,high Hardness
Usage: Photovoltaic Equipment Part
Name: High Precision Fine Surface Zirconia Ceramic Teeth
Packaging: wooden box with foam bag
Productivity: 10000 pieces/month
Place of Origin: Dongguan
Supply Ability: 1000000 pieces/ year
Certificate: ISO 9001-2015
Zirconia Alumina Ceramic Parts For Solar Photovoltaic
Amorphous silicon solar parts were deposited on porcelain stoneware tiles in order to develop a fully integrated PV building element. In a previous work we demonstrated the feasibility of adopting porcelain stoneware tiles as thin-film solar cell substrates and we fabricated 1×1cm2 solar cells on [industrial-level" ceramic substrates showing more than 4% efficiency. In this study we focus our attention on larger area (7cm2) devices deposited on 100cm2 tiles. As the active area increases additional problems arise from the surface of the substrate. In particular we find that short-circuit paths originate from the unfavorable properties of the substrate tiles (roughness, porosity, etc.) having dramatic consequences on the performance of larger area devices. With the assumption that spot-like regions, in which the back layer and the front layer are in electrical contact (local short-circuits), are present all over the device, we propose a new device structure to overcome the substrate drawbacks. A new contacts arrangement was designed in order to minimize the shunting effect of short-circuit paths. As a result an initial efficiency of 2.5% has been obtained using the new device structure for 7cm2 devices deposited on a 100cm2 PV mini-module tile.
Dongguan Mingrui Ceramic Technology Co.,LTD is a professional manufacturer of machined ceramic parts, has 10 senior engineers and lots of technicians. We produce strengthened structure zirconia ceramic bar,Zirconia Ceramic Shaft, Ceramic Tube, Ceramic Plate, ceramic sleeve, Ceramic Valve, Ceramic Plunger and Ceramic Arm. The products are applicable to instruments, medical instruments, clocks and electronic products, mills, energy and power, autocar and military and some other high-end areas.
In cooperation with Tsinghua University, we've achieved great successes in particular requirements. With our professional knowledge and business experience in machined ceramic parts, low-budget and high-performance new ceramic products are made of high–quality raw materials. The value of our ceramic products is greatly increased due to the composite technology and precise processing.
The products made by zirconia and alumina products have excellent performances,the properties of our products:
| Properties || Units || 95 Alumina || 99 Alumina || ZrO2 |
| Density || g / cm³ || 3.65 ||3.9||5.95-6.05|
| Water absorption || % ||0||0||0|
| Coefficient of thermal expansion || 10-6/K || 7.9 ||8.5||10.5|
| Modulus of Elasticity Young's Mod || GPa ||280||340||210|
| Poisson's ratio ||/||0.21||0.23||0.3|
|HV Hardness|| MPa ||1400||1700||1300-1365|
| Flexural Strength @ room temperature || MPa ||280||320||950|
| Flexural Strength @700°C || MPa ||220||230||210|
| Compressive Strength @ room temperature || MPa ||2000||2200||2000|
| Fracture Toughness || MPa *m 1/2 ||3.8||4.3||10|
| Heat conductivity @ room temperature || W/ m*k ||18-25|| 26-30 ||2-2.2|
| Electrical Resistivity @ room temperature || Ω*mm2 /m || 10^15 || 10^16 || 10^15 |
| Max use temperature || °C ||1850||2200||1500|
| Resistance to acid alkaline || / || high || high || high |
| Dielectric Constant || / ||9.5||9.8||26|
| Dielectric Strength || KV/mm ||10||10||10|
| Thermol Shock Resistance || △ T ( °C ) ||220||190||280-350|
| Tensile Strength @ 25 °C || MPa ||200||248||260|
| Thermal Conductivity(25℃) || W/m·K ||30||35||3|
we will give you quick response to solve your problems at the first time. we also improved our logistics service system so that you can enjoy a one to one intimate service.Each of our product is elaborately packed to insure it is intact when arriving;We cooperate with professional logistics such as DHL UPS,Fedex,etc.and offer realtime tracking data to our customers in time.
1.are you manufacturer or trade company?
We are a factory with our own workshop located in Chang'an Town ,Dongguan City,which is known as
[The hometown of mould",We have strong precision processing ability and excellent matching manufacturer.
2.Can you provide the free samples?
Yes, we can provide the sample free of charge if we have the stock product as customer's requirements, but the freight is on your side.
3.Can you accept OEM&ODM?
Yes, we can produce the products according to your demand and drawing.